$69.00

1-1/2" Series 7 US Valve - Check Valve
[07-1-0E-1.5]

1-1/2\" Series 7 US Valve - Check Valve

US Valve Series 7 Male NPT Check Valve

The Series 7 US Valve Check Valve Consists of:

Body: Carbon Steel ASTM A106 Gr.B
Discs: Aluminum ASTM 6061T6
Wing Support: Aluminum 6061T6
Sealing Member: EPDM
Cold Working Pressure (PSIG): 250




General Dimensions for Series 7 US Valve

Valve Size in. A B C
1 3-1/2 1.315 1-5/8
1-1/4 3-1/2 1.660 2
1-1/2 4 1.900 2-1/4
2 4 2-3/8 2-3/4
2-1/2 5 2-7/8 3-1/4
3 5-1/2 3-1/2 3-7/8
4 6 4-1/2 4-7/8
5 7 5-9/16 6-1/8
6 8 6-5/8 7-1/8
8 10 8-5/8 9-1/2
10 12 10-3/4 11-1/2
12 14 12-3/4 13-3/4
All dimensions in inches. Available in sizes from 1" to 12" in diameter.

Features & Benefits

Full Port Check Valves offer some impressive advantages over other types of check valves.

  • Low Pressure Drop (High Cv) Our elastomer hinge check valves have larger open area than other designs, thus providing higher capacity and lower pressure drops than swing and lift check, or even traditional dual plate wafer designs.

  • USA Content When specified, valves can be manufactured to meet stringent 75% or higher USA raw material content requirements.

  • ARRA Compliant USA content, substantial transformation and local assembly makes our Full Port Check Valves ARRA compliant for government funded projects.

  • Alleviates Water Hammer When spring activated, our discs are designed to close 33% faster than standard dual disc check valves due to the fact that they are closed at a 30 degree angle. This makes for an effective non-slam design when installed in liquid applications.

  • Simple Installation Available in a variety of connection types including Male NPT, Female NPT, Grooved End and Plain End. Grooved End valves are suitable for use with Victaulic® couplings. Plain End valves are suitable for TIG welding or for use with hose clamps.

  • Variety of Configurations We stock a wide variety of valve bodies in different styles and materials. These can be assembled with any one of our standard disc, optional spring and elastomer seal choices to make a valve that exactly fits your application. Pins and hardware are always 316SS. Custom lengths are available.

  • Our patented, aerodynamic wing support and reinforced elastomer hinged double discs provide the lowest resistance to flow. Front and rear disc plates provide strength and stability and ensure positive seating. Optional springs are available in a variety of tensions.

Optional Material Selection

If your application requires any of the optional materials listed below, please call us at 513-342-1668 or send us an email to info@tri-statewastewater.com and we will be happy to assist you with questions and pricing!

Body / Internal Materials

  • Aluminum
  • Carbon Steel
  • Brass
  • 316 Stainless Steel

Sealing Member Materials

Material Temperature Range*
Buna-N -60°F to 225°F
EPDM -40°F to 300°F
Viton -20°F to 450°F
Silicone -100°F to 500°F
Teflon -20°F to 450°F
* This temperature range is for general guidance. The figures may vary with application.

Spring Material

  • 316 Stainless Steel Standard Torque
  • 316 Stainless Steel Low Torque
  • 316 Stainless Steel Heavy Torque

Standard Models and Materials

Style Body Discs Wing Support Cold Working Pressure (psig)
07-0-0 Aluminum 6061T6 Aluminum 6061T6 Aluminum 6061T6 200
07-1-0 Carbon Steel ASTM A106 Gr.B Aluminum ASTM 6061T6 Aluminum 6061T6 250
07-1-4 Carbon Steel ASTM A106 Gr.B 316 Stainless Steel ASTM A240 316 Stainless Steel ASTM A276 300
07-3-3 Brass C230 Brass C260 Brass C377 150
07-4-4 Stainless Steel ASTM A312 Gr.316 316 Stainless Steel ASTM A240 316 Stainless Steel ASTM A276 300
Standard Elastomer: Buna-N
*150 with CS Hinge post bolting

Note: The picture may differ slightly from the actual product.


Please contact us with questions, or if you require variations to the valve.

We Accept
0 items
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search