AEON PD Part No. 28H333

We recommend that you review the manufacture's recommendation on the lubrication for your blower. Failure to use the correct lubrication in your blower may void your warranty. Gardner Denver Sutorbilt AEON Lubrication is recommended for Sutorbilt Legend PD Blowers.

AEON Synthetic Lubricants provide maximum protection for demanding operating conditions in any environment or application.

Application

Positive Displacement blowers & vacuum pumps

AEON PD Synthetic Lubricants provide maximum protection for demanding operating conditions in any environment or application

Description

AEON PD Synthetic Lubricants are custom blended, synthetic hydrocarbon (polyalphaolefin) based oils

AEON PD products are free of toxic materials or heavy metals per OSHA and EPA guidelines

AEON PD is compatible with the majority of seal materials: teflon, viton, nitrile buna N, fluorocarbon, polysulfide, polyacrylic and fluorosilicone

AEON PD-FG Food Grade complies with FDA 21 CFR 178.3570 requirements for lubricants with the possibility of incidental food contact

AEON PD-FG is National Science Foundation approved

Usage & Performance

Superior performance in a variety of application and temperatures

Factory recommended for Gardner Denver Sutorbilt®, DuroFlow®, CycloBlower®, HeliFlow® and TriFlow® PD blowers and vacuum pumps

Formulated for minimal blower wear and maximum equipment life

Optimized viscosity provides superior lubrication in severe hot and cold temperatures with minimal energy consumption

AEON PD-XD is now available

AEON PD-XD has the highest viscosity offered by Gardner Denver for Extreme Duty applications

Designed specifically for high ambient and high discharge temperature conditions

Benefits of Aeon PD vs. Mineral Oil

Longer Service Life & Improved Performance

AEON PD typically lasts up to 4 times longer than mineral oils operating under the same conditions
– Severe operating conditions may warrant more frequent oil changes
– Laboratory analysis of the oil should be used to help determine the optimum oil change interval

AEON PD Lubricants have a higher viscosity index

AEON PD lubricates equipment more effectively and better maintains viscosity at high temperatures

No need for seasonal oil changes (refer to Operating & Maintenance manuals for specific information)

Mineral Oils have poor low temperature properties, resulting in increased wear during start-up, ultimately shortening equipment life

Advanced Chemistry

AEON PD superior oil/water separation and corrosion inhibitors protect bearings and extend blower life significantly

Rust and oxidation inhibitors, and anti-foam additives provides improved performance

Mineral oils have increased water content reducing bearing life exponentially

AEON® PD Blower Lubrication Chart

Blower Discharge Temperatures	Ambient Temperatures
	Less than 10° F	10° F to 32° F	32° F to 90° F	Greater than 90° F
Less than 32° F	AEON PD AEON PD-FG	AEON PD AEON PD-FG
32° F to 100° F	AEON PD AEON PD-FG	AEON PD AEON PD-FG	AEON PD AEON PD-FG
100° F to 225° F	AEON PD AEON PD-FG	AEON PD AEON PD-FG	AEON PD AEON PD-FG	AEON PD AEON PD-FG
225° F to 300° F	AEON PD AEON PD-FG	AEON PD AEON PD-FG	AEON PD AEON PD-FG	AEON PD-XD
Greater than 300° F			AEON PD-XD	AEON PD-XD

Recommended AEON PD lubricant based on operating conditions.

Order Information

Available Sizes	AEON PD	AEON PD-FG	AEON PD-XD
	Part No.	Part No.	Part No.
1 Quart	28G23	28H97	28G46
Case (12 quarts)	28G24	28H98	28G47
1 Gallon	28G40	28H333	28G42
Case (6 gallons)	28G41	28H334	28G43
5 Gallon Pail	28G25	28H99	28G44
55 Gallon Drum	28G28	28H100	28G45