$19.98

Sutorbilt AEON PD Blower Lubricant - 1 Quart
[28G23]

Sutorbilt AEON PD Blower Lubricant - 1 Quart
AEON PD Part No. 28G23

We recommend that you review the manufacture's recommendation on the lubrication for your blower. Failure to use the correct lubrication in your blower may void your warranty. Gardner Denver Sutorbilt AEON Lubrication is recommended for Sutorbilt Legend PD Blowers.

AEON Synthetic Lubricants provide maximum protection for demanding operating conditions in any environment or application.

Application

  • Positive Displacement blowers & vacuum pumps
  • AEON PD Synthetic Lubricants provide maximum protection for demanding operating conditions in any environment or application
  • Description

  • AEON PD Synthetic Lubricants are custom blended, synthetic hydrocarbon (polyalphaolefin) based oils
  • AEON PD products are free of toxic materials or heavy metals per OSHA and EPA guidelines
  • AEON PD is compatible with the majority of seal materials: teflon, viton, nitrile buna N, fluorocarbon, polysulfide, polyacrylic and fluorosilicone
  • AEON PD-FG Food Grade complies with FDA 21 CFR 178.3570 requirements for lubricants with the possibility of incidental food contact
  • AEON PD-FG is National Science Foundation approved
  • Usage & Performance

  • Superior performance in a variety of application and temperatures
  • Factory recommended for Gardner Denver Sutorbilt®, DuroFlow®, CycloBlower®, HeliFlow® and TriFlow® PD blowers and vacuum pumps
  • Formulated for minimal blower wear and maximum equipment life
  • Optimized viscosity provides superior lubrication in severe hot and cold temperatures with minimal energy consumption
  • AEON PD-XD is now available

  • AEON PD-XD has the highest viscosity offered by Gardner Denver for Extreme Duty applications
  • Designed specifically for high ambient and high discharge temperature conditions
  • Benefits of Aeon PD vs. Mineral Oil

    Longer Service Life & Improved Performance
  • AEON PD typically lasts up to 4 times longer than mineral oils operating under the same conditions
    – Severe operating conditions may warrant more frequent oil changes
    – Laboratory analysis of the oil should be used to help determine the optimum oil change interval
  • AEON PD Lubricants have a higher viscosity index
  • AEON PD lubricates equipment more effectively and better maintains viscosity at high temperatures
  • No need for seasonal oil changes (refer to Operating & Maintenance manuals for specific information)
  • Mineral Oils have poor low temperature properties, resulting in increased wear during start-up, ultimately shortening equipment life
  • Advanced Chemistry

  • AEON PD superior oil/water separation and corrosion inhibitors protect bearings and extend blower life significantly
  • Rust and oxidation inhibitors, and anti-foam additives provides improved performance
  • Mineral oils have increased water content reducing bearing life exponentially
  • AEON® PD Blower Lubrication Chart

    Blower Discharge
    Temperatures
    Ambient Temperatures
    Less than 10° F 10° F to 32° F 32° F to 90° F Greater than 90° F
    Less than 32° FAEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    32° F to 100° FAEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    100° F to 225° FAEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    225° F to 300° FAEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    AEON PD
    AEON PD-FG
    AEON PD-XD
    Greater than
    300° F
    AEON PD-XDAEON PD-XD
    Recommended AEON PD lubricant based on operating conditions.

    Order Information

    Available Sizes AEON PD AEON PD-FG AEON PD-XD
    Part No. Part No. Part No.
    1 Quart28G2328H9728G46
    Case (12 quarts)28G2428H9828G47
    1 Gallon28G4028H33328G42
    Case (6 gallons)28G4128H33428G43
    5 Gallon Pail28G2528H9928G44
    55 Gallon Drum28G2828H10028G45

    We Accept
    0 items
    Quick Find
     
    Use keywords to find the product you are looking for.
    Advanced Search