Call for Price!

UV-2M2 Open Channel UV Disinfection System 50,000 GPD
[TS-UV-2M2]

UV-2M2 Open Channel UV Disinfection System 50,000 GPD
The Tri-State Wastewater Equipment International, LLC. Horizontal Channel Type Ultraviolet Disinfection Systems has the capability to disinfect gravity fed wastewater flows of up to one million gallons per day. Larger capacity requirements can be handled by our vertical-style series. The Tri-State Wastewater Horizontal Channel Type’s most significant features are its ease of installation, operation, and the small footprint.

The Tri-State Wastewater ultraviolet disinfection (UV) system comes standard with a stainless steel channel and built-in level control weir, remote-mounted NEMA 4X modified stainless steel power control center with a window kit and removable waterproof modules.

Typical Site Installations
  • Highway Rest Stops
  • Small Towns
  • Private Developments
  • Schools and Institutions
  • Camp Grounds
  • Mobile Home Communities
  • Business and Industrial Parks
  • Parks and Recreational Areas
  • Industrial Wastewater Plants

  • Standard Features
  • Stainless steel channel construction
  • Built-in level control weir with removable drain plug
  • Stainless steel weatherproof modules
  • Modified NEMA 4X stainless steel control system with window kit displaying lamp status and elapsed run time
  • Low pressure high output (HO) lamp technology
  • Ultraviolet Intensity Monitoring with analog display
  • Standard module cable length is 12’ from module to control panel
  • U-Channel flange connection

  • Optional Features
  • Transition Boxes for High Flow Rate Handling or for Backflow Prevention
  • Inlet and Outlet Flanged, Piped, or Threaded Connections available
  • Alarming Remote Connections via 4-20 mA Output or Dry Contact
  • Hand, Off, and Auto (HOA) Switches
  • Cleaning Racks
  • Module Sterilization Tanks
  • Redundant or Standby Banks
  • Complete Standby Spare Modules

  • Connection Options
    When designing an Ultraviolet Disinfection system into the overall wastewater treatment plant (WWTP), it is required to connect to the inlet and from the outlet of the UV system. The connection options are as follows:
  • Standard U-Channel pattern with bolt connection (shown as our standard configuration) provides a square connection and is typically used for bolt-on mount for structural steel walls, concrete channels, or for custom connections.
  • Transitions plates can be bolted to the U-Channel to allow for pipe stub, threaded pipe or flanged pipe connections.
  • Transition boxes can be bolted to the U-Channel pattern. The boxes can have 150# flanges, flange patterns, pipe stubs or threaded pipe connections. The transition boxes are used to connect to piping where high or turbulent flows are expected. The transition boxes help to de-energize and baffle the wastewater to create a more even flow.

  • Operation and Maintenance
    In order to meet the discharge permit, the system will require maintenance. Lamps will need to be replaced every 8,500 hours. Due to the heat of the lamps and the harsh nature of the wastewater, the quartz sleeves (the protective material over the lamps) will also need to be cleaned. The cleaning regime will be directly related to the pre-treatment, the makeup of the wastewater and access to personnel. Fouled quartz sleeves will prevent the UV light from penetrating the wastewater and thus will reduce system efficiency. An operator is required to remove the modules and clean the quartz sleeves with a lime, calcium or rust remover. This can be done on a work table or on a cleaning rack.

    Required Information for Design
  • Average Flow Rate
  • Peak Instantaneous Flow Rate
  • No-Flow Situations
  • Discharge Permit Limitations
  • Pre-Process Treatment Description
  • Total Suspended Solids (TSS)
  • Biological Oxygen Demand (BOD)
  • Installation Location (Indoor or Outdoor)
  • Transmission of Effluent
  • Is Adequate Access for Maintenance Personnel Available

  • Tri-State UV-Horizontal LineUp
    MODEL MAX FLOW RATE FLA TOTAL LAMPS LAMP LENGTH ANNUAL WATTS
    120V 220V
    TS-UV-1M2 25,000 GPD 17 GPM 13 1.1 2 36" 1,690
    TS-UV-2M2 50,000 GPD 34 GPM 3.0 1.6 4 36" 3,379
    TS-UV-3M2 75,000 GPD 51 GPM 3.2 1.7 6 36" 5,069
    TS-UV-4M2 100,000 GPD 68 GPM 4.2 2.1 8 36" 6,758
    TS-UV-5M2 125,000 GPD 85 GPM 5.3 2.6 10 36" 8,448
    TS-UV-6M2 150,000 GPD 102 GPM 6.3 3.4 12 36" 10,138
    TS-UV-4M4 200,000 GPD 139 GPM 11.0 5.5 16 36" 13,517
                   
    TS-UV-3L2 150,000 GPD 104 GPM 5.8 3.0 6 64" 4,562
    TS-UV-4L2 200,000 GPD 136 GPM 6.4 3.2 8 64" 6,083
    TS-UV-5L2 250,000 GPD 170 GPM 7.5 4.1 10 64" 7,603
                   
    TS-UV-3L4 288,000 GPD 204 GPM 10.0 5.0 12 64" 9,124
    TS-UV-4L4 400,000 GPD 272 GPM 12.0 6.0 16 64" 12,165
    TS-UV-5L4 500,000 GPD 340 GPM 15.0 7.5 20 64" 15,206
    TS-UV-6L4 600,000 GPD 408 GPM 18.0 9.0 24 64" 18,248
    TS-UV-7L4 700,000 GPD 486 GPM 22.4 11.2 28 64" 21,289
    TS-UV-8L4 750,000 GPD 544 GPM 24.0 12.0 32 64" 24,330
    TS-UV-10L4 1,000,000 GPD 680 GPM 30.0 15.0 40 64" 30,413


    UV System Length (excluding inlet and outlet connection transitions)
  • Type “M” Series – 52”
  • Type “L” Series – 120”


  • Please Note: The product picture may differ slightly from the actual product.
    We Accept
    0 items
    Quick Find
     
    Use keywords to find the product you are looking for.
    Advanced Search