Call for Price!

Sanuril Model 200
[Sanuril200]

Sanuril Model 200
The Sanuril Model 200 Tablet Feeder is a complete, one-piece system for highly reliable disinfection of effluent in properly operating treatment plants having a design capacity of 1,500 GPD or less. The tablet feeder is used in conjunction with SANURIL tablets, a disinfecting agent that provides a chemically stable source of chlorine for wastewater disinfection.

The Sanuril Model 200 Tablet feeder is suitable for assembly into new treatment systems. Also, it can be installed into existing treatment facilities where wastewater chlorination is being added or to replace troublesome, unreliable or complicated chlorination systems.


Specifications

The tablet feeder is made of tough, corrosion resistant rotomolded polyethylene. Compact and easy to handle, the tablet feeder measures 21 inches long, 8 inches wide and 10 inches deep. The feed tubes are 24 inches long with an outside diameter of 3 1/2 inches. Each tube holds 29 SANURIL tablets which measure 2-5/8 inches in diameter and are 13/16 inch thick. Inlet and outlet size is 4 inches in diameter.


Superior Performance at a Lower Cost

Better Performance - The entire plant flow passes through the chlorinator, where a thorough mixing of wastewater with a controlled amount of chlorine takes place. This means more effective bactericidal action and less bacteria regrowth.

Low Initial Cost - In addition to low investment in the Chlorinator, savings are compounded because no pumps, mixing tanks or costly control devices are required as with most other chlorination systems.

Simple, Low-Cost Installation - One-piece chlorinator construction requires only inlet piping. No electrical power, wiring, bypasses or other piping is required.

Lower Operating Costs - Chlorinator operates up to 60 days on a single charge of chlorine tablets. No time-consuming premixing of chemicals or costly cylinder handling. Recharging SANURIL 115 tablets is quick and easy. No costs for electrical power or auxiliary power.

Maintenance-Free Operation - No tanks, pumps, cylinders, external control devices or other moving parts to break down. The system is non-mechanical and rust and corrosion proof.
We Accept
1 x URAI-718 Roots Blower
1 x 3" Series 7 US Valve - Check Valve
1 x Norweco AT1500 UV Lamp
1 x 2" Series 7 US Valve - Check Valve
1 x Roots Synthetic Lubricating Oil ISO-VG-150 - Case of 12 Quarts
1 x 4" Series 7 US Valve - Check Valve
1 x 3H/3M/3L - 3" Series P - Repair Kit without Gears
1 x 2M/2L - 2" Series P - Repair Kit without Gears
1 x 1" Rubber Hose Connection
1 x Bottom Discharge Clog-Free Discharge Diffuser
1 x 6H/6M/6L - 6" Series P - Repair Gear Kit
1 x 8H/8M/8L - 8" Series P - Repair Gear Kit
1 x 3" Rubber Hose Connection
1 x 5H/5M/5L - 5" Series P - Repair Gear Kit
1 x 5MP (GAEMDPA) / 5MVP (GAEMBPA) Sutorbilt Legend Blower
1 x URAI-32 Roots Blower
1 x 1.5" Rubber Hose Connection
1 x URAI-53 Roots Blower
1 x Low Pressure Linear Air Pump TS-LAP-40P
1 x Snap Cap 3/4" Coarse Air Diffuser
1 x 3H/3M/3L - 3" Series P - Repair Gear Kit
1 x 8H/8M/8L - 8" Series P - Repair Kit without Gears
1 x 2.5" Rubber Hose Connection
1 x Snap Cap 3/8" Coarse Air Diffuser
1 x Fine Air Porous Stone Diffuser
1 x 7H/7M/7L - 7" Series P - Repair Kit without Gears
1 x 5H/5M/5L - 5" Series P - Repair Kit without Gears
1 x 6H/6M/6L - 6" Series P - Repair Kit without Gears
1 x Low Pressure Linear Air Pump TS-LAP-80P
1 x 4H/4M/4L - 4" Series P - Repair Gear Kit
1 x Low Pressure Linear Air Pump TS-LAP-100P
1 x 4H/4M/4L - 4" Series P - Repair Kit without Gears
1 x 2" Rubber Hose Connection
1 x 4" Rubber Hose Connection
1 x 2M/2L - 2" Series P - Repair Gear Kit
1 x 7H/7M/7L - 7" Series P - Repair Gear Kit
1 x Norweco Model AT 1500 Ultraviolet Disinfection System
1 x Medium Fiberglass Blower Enclosure Model TS-FIB-M
1 x Medium-Wide Fiberglass Blower Enclosure Model TS-FIB-MW
1 x Medium-Wide Fiberglass Blower Enclosure Noise Suppression Adder
1 x Weight Loaded 4" Pressure Relief Valve
1 x 3" - Style 5118 Technocheck Check Valve
1 x Spring-Loaded 2-1/2" Pressure Relief Valve
1 x 1" Bronze - Horizontal Swing Check Valve
1 x Weight Loaded 8" Pressure Relief Valve
1 x 12" - Style 5118 Technocheck Check Valve
1 x Small Fiberglass Blower Enclosure Model TS-FIB-S
1 x Small Fiberglass Blower Enclosure Noise Suppression Adder
1 x Weight Loaded 6" Pressure Relief Valve
1 x Spring-Loaded 1" Pressure Relief Valve
1 x Spring-Loaded 1-1/2" Pressure Relief Valve
1 x Weight Loaded 2" Pressure Relief Valve
1 x Sanuril Feeder Tube Cap
1 x Spring-Loaded 2" Pressure Relief Valve
1 x Weight Loaded 1" Pressure Relief Valve
1 x 1" Thick Noise Suppression Panels 2ft. x 4ft., Qty 4
1 x Fiberglass Enclosure Exhaust Fan Installed Adder
1 x Spring-Loaded 4" Pressure Relief Valve
1 x URAI24/2L 2HP Fiberglass Aeration Blower 25CFM/5PSI
1 x Large Fiberglass Blower Enclosure Noise Suppression Adder
1 x Medium Fiberglass Blower Enclosure Noise Suppression Adder
1 x Weight Loaded 3" Pressure Relief Valve
1 x TS-2L/3HP-SD Raised Base Steel Duplex Aeration Blower 50CFM/5PSI
1 x Spring-Loaded 3" Pressure Relief Valve
$33,824.53
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search