Call for Price!

Sanuril Model 200
[Sanuril200]

Sanuril Model 200
The Sanuril Model 200 Tablet Feeder is a complete, one-piece system for highly reliable disinfection of effluent in properly operating treatment plants having a design capacity of 1,500 GPD or less. The tablet feeder is used in conjunction with SANURIL tablets, a disinfecting agent that provides a chemically stable source of chlorine for wastewater disinfection.

The Sanuril Model 200 Tablet feeder is suitable for assembly into new treatment systems. Also, it can be installed into existing treatment facilities where wastewater chlorination is being added or to replace troublesome, unreliable or complicated chlorination systems.


Specifications

The tablet feeder is made of tough, corrosion resistant rotomolded polyethylene. Compact and easy to handle, the tablet feeder measures 21 inches long, 8 inches wide and 10 inches deep. The feed tubes are 24 inches long with an outside diameter of 3 1/2 inches. Each tube holds 29 SANURIL tablets which measure 2-5/8 inches in diameter and are 13/16 inch thick. Inlet and outlet size is 4 inches in diameter.


Superior Performance at a Lower Cost

Better Performance - The entire plant flow passes through the chlorinator, where a thorough mixing of wastewater with a controlled amount of chlorine takes place. This means more effective bactericidal action and less bacteria regrowth.

Low Initial Cost - In addition to low investment in the Chlorinator, savings are compounded because no pumps, mixing tanks or costly control devices are required as with most other chlorination systems.

Simple, Low-Cost Installation - One-piece chlorinator construction requires only inlet piping. No electrical power, wiring, bypasses or other piping is required.

Lower Operating Costs - Chlorinator operates up to 60 days on a single charge of chlorine tablets. No time-consuming premixing of chemicals or costly cylinder handling. Recharging SANURIL 115 tablets is quick and easy. No costs for electrical power or auxiliary power.

Maintenance-Free Operation - No tanks, pumps, cylinders, external control devices or other moving parts to break down. The system is non-mechanical and rust and corrosion proof.
We Accept
1 x Wiper O-Ring
1 x QZ0145 64" Quartz Sleeve
2 x O-Ring for Q-020833
1 x Weight Loaded 1" Pressure Relief Valve
1 x Spring-Loaded 2" Pressure Relief Valve
1 x Weight Loaded 4" Pressure Relief Valve
1 x Low Pressure Linear Air Pump TS-LAP-100P
1 x 5H/5M/5L - 5" Series P - Repair Kit without Gears
1 x Mobil Polyrex EM 14.1 oz Electric Motor Grease
1 x 3MP (GABMDPA) / 3MVP (GABMBPA) Sutorbilt Legend Blower
1 x Froth Spray Nozzle
1 x 5LP (GAELDPA) / 5LVP (GAELBPA) Sutorbilt Legend Blower
1 x 3H/3M/3L - 3" Series R - Repair Gear Kit
1 x Low Pressure Linear Air Pump TS-LAP-40P
1 x Roots Synthetic Lubricating Oil ISO-VG-320 - 1 Gallon
1 x 3H/3M/3L - 3" Series P - Repair Gear Kit
1 x Spring-Loaded 1" Pressure Relief Valve
1 x URAI-76 / URAI-711 / URAI-718 - 7" Repair Kit with Gears
1 x Medium-Wide Fiberglass Blower Enclosure Model TS-FIB-MW
1 x Norweco AT1500 UV Lamp
1 x 2MP (GAAMDPA) / 2MVP (GAAMBPA) Sutorbilt Legend Blower
1 x Small Fiberglass Blower Enclosure Noise Suppression Adder
1 x Roots Synthetic Lubricating Oil ISO-VG-320 - 5 Gallon Pail
1 x 4H/4M/4L - 4" Series P - Repair Kit without Gears
1 x Wiper Blade for Sunlight Systems SL160
1 x 5MP (GAEMDPA) / 5MVP (GAEMBPA) Sutorbilt Legend Blower
1 x URAI45/4M 7.5HP Fiberglass Aeration Blower 205CFM/5PSI
1 x O-Ring for Sunlight Systems SL160
1 x 3" Series 7 US Valve - Check Valve
1 x URAI22/2M 1HP Fiberglass Aeration Blower 25CFM/3.5PSI
1 x Roots Synthetic Lubricating Oil ISO-VG-220 - Case of 12 Quarts
1 x Bottom Discharge Clog-Free Discharge Diffuser
1 x URAI-53 / URAI-56 / URAI-59 - 5" Repair Kit with Gears
1 x 3H/3M/3L - 3" Series P - Repair Kit without Gears
1 x 4" Series 7 US Valve - Check Valve
1 x Sanuril Feeder Tube Cap
$20,339.10
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search